Humidity Controller

Description de l'article

Control humidity automatically and accurately with the Total Humidity Controller. The THC can be switched between humidify and dehumidify for removing unwanted atmospheric moisture accumulating within an enclosed area or to add needed moisture to the air by means of humidification. The THC-1 humidity switch controls humidity equipment by providing power when humidity varies from the adjustable set point.

Features of The Total Humidity Controller
Dehumidifying mode
High humidity conditions will activate fans or other dehumidifying apparatus until level drops approximately 7% in relative humidity. At this point, dehumidifying equipment is disabled until humidity increases again 7%.

Humidifying mode
This control operates fogging or other humidifying equipment by activating switches, motors, valves or pumps. Humidifiers can be precisely controlled according to atmospheric humidity to create ideal conditions for any environment. The 110V outlet receptacle receives power and turns the humidifier on when the humidity in a room drops lower than your preset minimum allowable humidity percentage.

How it Works — The Total Humidity Controller

Basic set-up to use for humidification control.
Could also be used with a misting system.
Basic operation to exhaust excess humidity.
Could also be controlling a dehumidifier.
The total humidity controller utilizes a duplex cord-cap which provides a combination plug and receptacle power cord design. Insert plug into 110V wall outlet and plug dehumidifier or humidifier into the piggy back receptacle.
Power usage: switches 120V at 15 amp maximum; sensor allows a 7% (differential) comfort zone between "on" and "off" functions.

• Digg This!